Lonza Tablet Feeder Systems

Sanikit Tablet Feeder System

Lonza Sanikit™ Tablet Feeder System

The Lonza Sanikit™ Systems are reliable and are easy to install and operate. With the advantage that no electricity is required with these systems, they are cost-effective and require little maintenance.   

How This Feeder Works

With a gravity fed or pressurized (max 80 PSI) water supply, about ¼ of the water to be treated flows through a mixing chamber that dissolves HTH® Disinfecting Tablets. A concentrated chlorine solution is created and then remixed with the remaining ¾ of water. This freshly treated water needs to flow into a storage tank to ensure proper contact time.

  • Treatment for system flows of up to ~1000m³/day
  • Low-to mid-sized potable water networks serving between 500 and 5000 persons, depending on local conditions and quality of the water to be treated
  • A range of model sizes are available depending on requirements
  • No electricity required
  • Proportional feed rate (function of the flow rate)
  • Intermittent or continuous treatment
  • To be used in conjunction with HTH® Disinfecting Tablets
HTH Scientific Inline Fedder

HTH® Scientific™ Inline Feeders

The HTH® Scientific™ Inline Feeder range was designed with the vision to withstand harsh conditions. System design allows for peace of mind and ensures reliable and effective dosing of active chlorine into water disinfection systems. Available in sizes 2kg, 4kg and 16kg, the feeders are easy to install and operate. With no electricity required, they are easily managed, with little maintenance needed. Dosage rates can be regulated and controlled as preferred. Upon feeder installation, our technical staff are available to run an initial calibration, after which the feeder maintains a steady dose rate as per the calibrated set point.

2kg, 4kg and 16kg HTH® Scientific™ Inline Feeders

  • To be used in conjunction with HTH® Disinfecting Tablets
  • Able to chlorinate 5,000Ɩ – 3,1 MƖ/day at a dosage rate of 3ppm
  • HTH® Scientific™ 2kg and 4kg Inline Feeders include wall mount brackets for simple installation
  • HTH® Scientific™ 16kg Inline Feeder comes pre-mounted on steel skid